Another update

Marlin/Configuration.h

@@ -61,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "AWeisman & MKassanoff" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -88,7 +88,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V3_0
 #endif
 
 // @section serial
@@ -101,7 +101,7 @@
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#define SERIAL_PORT 0
+#define SERIAL_PORT 2
 
 /**
  * Serial Port Baud Rate
@@ -114,7 +114,7 @@
  *
  * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  */
-#define BAUDRATE 250000
+#define BAUDRATE 115200
 
 //#define BAUD_RATE_GCODE     // Enable G-code M575 to set the baud rate
 
@@ -138,11 +138,11 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "ShadowLynx"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
-//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
+#define MACHINE_UUID "2910c5aa-2df5-43e9-89e3-6202b54305fe"
 
 // @section stepper drivers
 
@@ -161,9 +161,9 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-#define X_DRIVER_TYPE  A4988
+#define X_DRIVER_TYPE  TMC2209
-#define Y_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  TMC2209
-#define Z_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  TMC2209
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
@@ -175,7 +175,7 @@
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2209
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -686,9 +686,9 @@
     #define DEFAULT_Ki_LIST {   1.08,   1.08 }
     #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
-    #define DEFAULT_Kp  22.20
+    #define DEFAULT_Kp  33.69
-    #define DEFAULT_Ki   1.08
+    #define DEFAULT_Ki   4.20
-    #define DEFAULT_Kd 114.00
+    #define DEFAULT_Kd  67.51
   #endif
 #else
   #define BANG_MAX 255    // Limit hotend current while in bang-bang mode; 255=full current
@@ -767,7 +767,7 @@
  *
  * With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
  */
-//#define PIDTEMPBED
+#define PIDTEMPBED
 
 #if ENABLED(PIDTEMPBED)
   //#define MIN_BED_POWER 0
@@ -775,9 +775,9 @@
 
   // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKp 159.51
-  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKi  30.16
-  #define DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKd 562.43
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #else
@@ -1152,7 +1152,7 @@
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
-//#define ENDSTOP_INTERRUPTS_FEATURE
+#define ENDSTOP_INTERRUPTS_FEATURE
 
 /**
  * Endstop Noise Threshold
@@ -1196,14 +1196,14 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 140.11 }
 
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 20, 120 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1216,7 +1216,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1231,9 +1231,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          500    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
+#define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -1243,7 +1243,7 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-//#define CLASSIC_JERK
+#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
   #define DEFAULT_XJERK 10.0
   #define DEFAULT_YJERK 10.0
@@ -1286,7 +1286,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1305,7 +1305,7 @@
 #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
 // Force the use of the probe for Z-axis homing
-//#define USE_PROBE_FOR_Z_HOMING
+#define USE_PROBE_FOR_Z_HOMING
 
 /**
  * Z_MIN_PROBE_PIN
@@ -1320,7 +1320,7 @@
  *    - Normally-closed (NC) also connect to GND.
  *    - Normally-open (NO) also connect to 5V.
  */
-//#define Z_MIN_PROBE_PIN -1
+#define Z_MIN_PROBE_PIN PC14
 
 /**
  * Probe Type
@@ -1359,7 +1359,7 @@
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-//#define BLTOUCH
+#define BLTOUCH
 
 /**
  * MagLev V4 probe by MDD
@@ -1511,7 +1511,7 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { -30, -5, -1.2 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1596,11 +1596,11 @@
 #define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MIN -30
-#define Z_PROBE_OFFSET_RANGE_MAX 20
+#define Z_PROBE_OFFSET_RANGE_MAX 30
 
 // Enable the M48 repeatability test to test probe accuracy
-//#define Z_MIN_PROBE_REPEATABILITY_TEST
+#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 // Before deploy/stow pause for user confirmation
 //#define PAUSE_BEFORE_DEPLOY_STOW
@@ -1670,7 +1670,7 @@
 // @section motion
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
@@ -1683,7 +1683,7 @@
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
-#define INVERT_E0_DIR false
+#define INVERT_E0_DIR true
 #define INVERT_E1_DIR false
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
@@ -1724,16 +1724,16 @@
 // @section geometry
 
 // The size of the printable area
-#define X_BED_SIZE 200
+#define X_BED_SIZE 235
-#define Y_BED_SIZE 200
+#define Y_BED_SIZE 235
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
-#define X_MIN_POS 0
+#define X_MIN_POS -5
-#define Y_MIN_POS 0
+#define Y_MIN_POS -7
 #define Z_MIN_POS 0
-#define X_MAX_POS X_BED_SIZE
+#define X_MAX_POS X_BED_SIZE+10
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 250
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0

README.md

@@ -1,4 +1,4 @@
-#Marlin for Marla - Building for an SKR Mini E3 v3
+<h1 align="center">Marlin for Marla - Building for an SKR Mini E3 v3</h1>
 
 <p align="center"><img src="buildroot/share/pixmaps/logo/marlin-outrun-nf-500.png" height="250" alt="MarlinFirmware's logo" /></p>
 

platformio.ini

@@ -13,7 +13,7 @@
 [platformio]
 src_dir      = Marlin
 boards_dir   = buildroot/share/PlatformIO/boards
-default_envs = mega2560
+default_envs = STM32G0B1RE_btt
 include_dir  = Marlin
 extra_configs =
     Marlin/config.ini