AWeisman/marlas-marlin-2.1.2.5
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

YZ Inverted & pin defined

Browse Source
This commit is contained in:
Weisman, Alex (Contractor-NBCUniversal)
2024-12-16 19:36:55 -05:00
parent 3edf25214c
commit 05b1d99ba3
2 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+2 -2
View File
@@ -1670,8 +1670,8 @@
// @section motion // @section motion
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false #define INVERT_X_DIR true
#define INVERT_Y_DIR false #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
//#define INVERT_I_DIR false //#define INVERT_I_DIR false
//#define INVERT_J_DIR false //#define INVERT_J_DIR false
Marlin/Configuration_adv.h
+2 -2
View File
@@ -533,9 +533,9 @@
* The fan turns on automatically whenever any driver is enabled and turns * The fan turns on automatically whenever any driver is enabled and turns
* off (or reduces to idle speed) shortly after drivers are turned off. * off (or reduces to idle speed) shortly after drivers are turned off.
*/ */
//#define USE_CONTROLLER_FAN #define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN) #if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan #define CONTROLLER_FAN_PIN PB15 // Set a custom pin for the controller fan
//#define CONTROLLER_FAN2_PIN -1 // Set a custom pin for second controller fan //#define CONTROLLER_FAN2_PIN -1 // Set a custom pin for second controller fan
//#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
//#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.